MOSFET with active brake Ultra 2.gen

Aktivní brzda Ultra 2.gen (5)
  • Aktivní brzda Ultra 2.gen (5)
  • Aktivní brzda Ultra 2.gen (14)
  • Aktivní brzda Ultra 2.gen (12)
  • Aktivní brzda Ultra 2.gen (13)
  • Aktivní brzda Ultra 2.gen (6)
  • Aktivní brzda Ultra 2.gen (7)
  • Aktivní brzda Ultra 2.gen (8)
  • Aktivní brzda Ultra 2.gen (9)
  • Aktivní brzda Ultra 2.gen (10)
  • Aktivní brzda Ultra 2.gen (11)
  • Aktivní brzda Ultra (4)

MOSFET gives you contactless switching of any circuit. Active break function uses residual energy of motor for its imidiate stop. The higher the torque of motor, the better breaking effect. Advantages in use of MOSFET with… Show more

 In Stock 85 pcs
17.13
14.16 ex. VAT
VAT:
21 %
pcs
Product code:
GRZ00085
Catalog number:
A01-085
Warranty:
2 years

MOSFET gives you contactless switching of any circuit. Active break function uses residual energy of motor for its imidiate stop. The higher the torque of motor, the better breaking effect.

Advantages in use of MOSFET with active break:

  • Stops the piston in the default position and leaves the spring loose when on semi.
  • Lower wear for not just piston and sping, but many other parts as well.
  • Contactless switching. 
  • No more damaging of trigger contacts by high current - used for signal only.
  • Increases rate of fire as well as battery life.
  • Solves problem with double shot on semi.
  • Works with all commonly used batteries (Ni-Mh/Ni-Cd/Li-Pol/Li-Ion/Li-Fe) with voltage 6,6V-14,8V.
  • Designed for all AEGs - airsoft electric guns.

MOSFET with active break Ultra description:

  • Dimensions 35x14,5x14mm.
  • Maximum current up to 140A constant - thanks to integrated cooler can be used practicaly without restriction.
  • Power wires can be used up to 1,5mm2 (AWG16), signal up to 0,25mm2 (AWG24).
  • Connected by two wires to each part - battery, motor, trigger contacts (see scheme).
  • Built-in voltage stabilisation keeps MOSFET fully used at all times.
  • Built-in cooler allows MOSFET to work in extreme conditions.

Alternatives:

  • If you do not expect extreme conditions, choose MOSFET with active break.
  • If you are not familiar with soldering, choose alternate with complete wiring.

Package contents: MOSFET with active break Ultra, heat-shrink tubing for MOSFET, user manual with instalation instructions

WARNING: MOSFET should be installed by qualified AEG professionals only. Manufacturer is not liable for any damage on the gun caused by unprofessional installation. Do not use soldering gun!

Aktivní brzda Ultra 2.gen (14) Aktivní brzda Ultra 2.gen (12) Aktivní brzda Ultra 2.gen (13) Aktivní brzda Ultra 2.gen (6) Aktivní brzda Ultra 2.gen (7) Aktivní brzda Ultra 2.gen (8) Aktivní brzda Ultra 2.gen (9) Aktivní brzda Ultra 2.gen (10) Aktivní brzda Ultra 2.gen (11) Aktivní brzda Ultra (4)